Kaida Superior Concrete Finishing Power Trowel

Customization:	Available
Application:	Curing Agent
Type:	Concrete Floor Harden Agent

Technical Specifications

Appearance

Liquid

Certificates

ISO9001-2008

Classification

Catalyst

Place of Origin

Tianjin

Purity

99% Min

Application

Insulated Paint

Packaging

25kg Plastic Drum

Delivery Time

Shipped in 10 Days After Payment

Transport

Plastic Bucket

Capacity

10,000 units

High Quality KD301 Concrete Floor Harden Agent

Superior Product Features

◈

Hardness: After penetration treatment, Mo's hardness reaches level 8, an increase of 45.3%.

◈

Wear-resistant: Solidifies into a hard surface, increasing wear resistance by more than 8 times.

◈

Dustproof: Reacts with silicate to form a compact whole, permanently controlling surface dust.

◈

Anti-skid: Prevents saline and alkaline components from precipitating, reducing slippage.

◈

Anti-pressure: Compressive strength enhanced by 27.3%; flexural strength increased by 3 times.

◈

Impermeability: Fills surface pores to inhibit water, oil, and dirt penetration.

◈

Brightness: Creates a marble-like luster; gloss improves with extended use.

◈

Environmental: Colorless, odorless, non-toxic, with zero VOC emissions.

Professional Application Insights

Two-Part Sealed Hardener: For new or dense ground, a single group may suffice. However, for old or loose cement ground, a two-part system (alkaline and acidic) is essential to avoid cracks and extend service life up to 20 years.

Timing: Typically applied when ground is polished to 150-300 mesh. If the ground is loose, apply before grinding to raise hardness.

Construction Temperature: Ideal between 0°C and 50°C. The agent must not be frozen to ensure proper penetration.

Step-by-Step Construction Guide

1

Cleaning: Use a professional dust pushing or washing machine to clean the ground thoroughly.

2

Base Surface Treatment: Polish with 50-300 mesh grinding plates. Vacuum all dust to ensure pores can absorb material.

3

Spraying A (Base Dense): Apply CFS-300 (0.15Kg/sqm). Dilute 1:1 to 1:6 based on ground condition. Allow 3 hours for penetration.

4

Fine Grinding I: After 12 hours, moisten and grind with 300 mesh piece. Remove dirt and dry for 12 hours.

5

Spraying B (Hardening Bright): Spray CFS-301 (0.2kg/sqm) on dry ground. Do not add water. Allow 2 hours penetration.

6

Fine Grinding II: Moisten and use 500-mesh grinder to remove surface dirt. Dry the ground completely.

7

Polishing: Use 1000-3000 mesh grinding plates for professional polishing.

8

Mirror Effect: Apply CFS-400 polishing agent (0.05kg/sqm). After 3-6 mins, use 6000 mesh sponge polishing for a mirror finish.

Frequently Asked Questions

What is the final hardness of the concrete after treatment?

After the penetration treatment, the Mo's hardness of the ground will reach level 8, which is an increase of approximately 45.3% compared to untreated concrete.

Is the floor hardening agent environmentally friendly?

Yes, the product is colorless, odorless, non-toxic, and has zero VOC emissions, making it safe for various indoor environments.

Can this be used on old or loose cement floors?

Absolutely. For old or loose ground, we recommend the two-part sealing system (alkaline and acidic) to ensure a hard, beautiful finish and prevent future cracking.

What are the temperature requirements for construction?

Construction is possible between 0°C and 50°C. It is critical that the agent does not freeze, as frozen material cannot penetrate the concrete surface.

How long is the service life of the treated floor?

When using the professional two-part sealing system, the service life of the floor reinforcement can reach up to 20 years.

What is the standard packaging and MOQ?

The standard packaging is a 25kg plastic drum. We provide 1 set as the Minimum Order Quantity (MOQ) for testing purposes.